22
23
24
21
352-00001-02 Rev B
SPECIFICATIONS
Rated Voltage . . . . . . . . . . . . . . . . 20-30 VAC, 24 nominal
Rated A.C. Current . . . . . . . . . . . . 0.050 Amps to 0.75 Amps
continuous per output with
surges to 3 Amps Max.
Rated D.C. Current . . . . . . . . . . . . 0 Amps to 0.75 Amps
continuous per output with
surges to 3 Amps Max.
Control Range . . . . . . . . . . . . . . . .
Heating:
38° to 88°F in 1° Steps
(5° to 30°C in 1° Steps)
Cooling:
60° to 108°F in 1° Steps
(16° to 40°C in 1° Steps)
Thermostat Measurement Range . . 28° to 124°F (0° to 48°C)
O.D.T. Displayed Range . . . . . . . . -50° to 124°F (-48° to 48°C)
Control Accuracy . . . . . . . . . . . . . . ± 1°F at 68°F Accuracy
(± .5°C at 20°C Accuracy)
Minimum Deadband . . . . . . . . . . . (between heating and cooling)
2°F (1°C)
NOTE:
This thermostat contains electronic circuitry replacing the
conventional mechanical anticipator.
DESCRIPTION OF ICONS
SENSOR FAULTS
There are two sensor faults:
1. Internal sensor is shorted.
2. Internal sensor is open.
When the internal sensor is shorted [the sensed temperature
>= 124°F (48°C)], all equipment is turned off and the following
icons are flashed on the LCD:
When the internal sensor is open [the sensed temperature
<= 32°F (0°C)], all equipment is turned off and the following icons
are flashed on the LCD:
An open condition is ignored the first 20 minutes after powering
the thermostat to allow the equipment to heat the surrounding
environment. This will avoid premature deactivation of the
equipment if the ambient temperature should happen to be
below 32°F (0°C).
1 (ONE) YEAR LIMITED WARRANTY
NetworkThermostat™ warrants to the original purchaser that
this product and its component parts will be free from defects in
workmanship and materials for a period of one year from the date
of purchase with proof of purchase.
Warranty Limitations
This warranty begins on the date of purchase.
Warranty is Void if:
The date code is defaced or removed.
The product has a defect or damage due to product alteration,
connection to an improper electrical supply, shipping and
handling, accident, fire, flood, lightning, or other conditions
beyond the control of the manufacturer.
The product is not installed according to the manufacturers
instructions and specifications.
The product has been installed near sources of electromagnetic
interference (EMI) such as arcing relay contacts.
Owner’s Responsibility
Provide proof of purchase.
Provide normal care and maintenance.
Pay for freight, labor and travel.
Pay for service calls related to product installation.
Return any defective product.
In no event shall the manufacturer be liable for incidental or
consequential damages.
This warranty gives you specific legal rights and you may have
others which vary by state and/or province. For example, some
states and/or provinces do not allow the exclusion or limitation of
incidental or consequential damages, so this exclusion may not
apply to you.
The manufacturer’s continuing commitment to quality products
may require a change in specifications without notice.
Net/X™ RP32-NX Programmable Thermostat meets CA Title
24 requirements.
This equipment, if installed in strict accordance with the
manufacturer’s instructions, complies with the limits for a Class B
computing device pursuant to Subpart J of Part 15 of FCC rules.
Displays clock and vacation
times in program mode
30 minute display
during power failure
High and Low
Sensor Values
(Indicating Faults)
Adaptive
Recovery
Flashes
when active
Location Of
Icons On LCD
