background image

NTI XTENDEX KVM EXTENDER 

 

1

 
 

INTRODUCTION 

 
The ST-C5KVM CAT5 Extender is designed to enable the relocation of a computer monitor, keyboard, and mouse from a 
computer or NTI KVM switch by as much as 1000 feet while keeping a second monitor local to the computer is so desired.  It is 
extremely simple to install and has been thoroughly tested to insure reliable performance.  Through the use of Category 5 
unshielded twisted-pair cable it is possible to economically increase the flexibility of a computer system.    Here are some of the 
features and ways this can benefit any workplace: 
 

  Allows the placement of a monitor, keyboard, and mouse in a location where only these parts are needed without having  

       the CPU there too, taking up valuable space.  

 

  Increases desk and floor space. 

 

  Compatible with XGA, VGA, and SVGA systems. 

 

  Provides crisp and clear resolution up to 1280 x 1024 @ 1000 feet,  

                                                                        1600 x 1200 @  600  feet, and 
                                                                        1900 x 1200 @  400 feet.     

 

  Compatible with all NTI switches and splitters, enabling the joining of products to create a  system that satisfies all  

        networking needs.    

 

  Compatible with PC and SUN computers.   (Contact our sales department for details.) 

 

  Video quality adjustment, for varying lengths of cable, is automatic providing optimum image quality.  

 
 
 
 
 
 
 

 
                                                          

MATERIALS 

 

Materials Supplied with this kit: 

 

9

 

NTI ST-C5KVM KVM Extender Local Unit 

9

 

NTI ST-C5KVM KVM Extender Remote Unit 

9

 

Two-120VAC or 240VAC-5VDC/2A AC Adapters 

9

 

VEXT-3  3’ Video Cable  

9

 

VKTINT-1  1’ Standard PS2 Mouse and Keyboard Cable 

9

 

SKTINT-3-MM 3’ SUN Mouse and Keyboard Cable 

9

 

VKTINT-3-MM 3’ PS2 Mouse and Keyboard Cable 

9

 This 

manual 

 

Additional materials may need to be ordered, depending upon the configuration: 

 

¾

 

Video adapter for connection between the Local and a non-VGA SUN computer 

¾

  Video adapter/cable for connection between a non-VGA SUN Monitor and the CAT5 Remote Unit 

¾

 

VEXT-xx  if the Local will be located further than 3’ from the computer or KVM 

¾

 

CAT5  unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg. 6 for 
proper EIA/TIA 568 B wiring method). 

                  

Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-742-8324 (800-RGB-TECH) in US & Canada 
or 330-562-7070 (Worldwide) or at our website at 

http://www.networktechinc.com

 and we will be happy to be of assistance. 

 
 
 
 
 
 

Содержание XTENDEX ST-C5KVM












Отзывы: