NTI VOPEX HDMI Splitter/Extender
9
INTERCONNECTION CABLE WIRING METHOD
The connection cable between the remote and local is terminated with RJ45 connectors and must be wired according to the
EIA/TIA 568 B industry standard. Wiring is as per the table and drawing below.
Pin
Wire Color
Pair
Function
1
White/Orange
2
T
2
Orange
2
R
3
White/Green
3
T
4
Blue 1
R
5
White/Blue
1
T
6
Green 3
R
7
White/Brown
4
T
8
Brown 4
R
Figure 6- View looking into RJ45 female
LED INDICATIONS
The two LED
’
s on the RJ45 connectors of the components in this manual have the following meaning:
VOPEX:
All ports: Right = Power ON,
Left: Flashing = Waiting for receiver ready;
Solid = Receiver is attached to the port, EDID is validated, HDCP is active and working
ST-C5HDMI-150 Receiver:
Right = Power ON,
Left = Receiving HDMI signals
ST-C5HDMI-RD-150 Receiver:
“RJ45-In” (Left): Left = Power ON,
Right: Flashing = Waiting for the display ready;
Solid= Display is attached, EDID is validated, HDCP is active and working.
“RJ45-Out” (Right): Left = Receiving the HDMI signal from transmitter;
Right: Flashing =Waiting for the downstream receiver on the UTP port ready;
Solid = downstream receiver is attached to the ST-C5HDMI-RD-150, EDID is validated,
HDCP is active and working
ST-C5HDMI-RD3-150 Receiver:
“RJ45-In” (Left): Left = Power ON,
Right: Flashing = Waiting for any display on the HDMI port ready;
Solid = At least one display is ready on the three HDMI ports, EDID is validated, HDCP is active and
working.
“RJ45-Out” (Right): Left = Receiving the HDMI signal from transmitter;
Right: Flashing =Waiting for the downstream receiver on the UTP port ready;
Solid = Downstream receiver is attached to the ST-C5HDMI-RD3-150, EDID is validated,
HDCP is active and working
T
1
+
R
2
-
T
3
+
R
4
-
T
5
+
R
6
-
T
7
+
R
8
-
Pair 2
Pair 1
Pair 4
Pair 3
