NTI 4K HDMI EXTENDER OVER HDBASE-T
5
RS232 Cable Pinout
If an RS232 Cable is used, the following connections need to be made;
DB9F Pins
(Connect at
PC (DTE ))
Transmitter
Terminal
Block
Signal
DB9M Pins
(Connect to
device (DCE))
Receiver
Terminal
Block
Signal
3
T
TxD Out
3
T
TxD In
2
R
RxD In
2
R
RxD Out
5 G
Gnd
5 G
Gnd
VESA Mounting Bracket
A VESA Mounting Bracket is available (NTI PN: MK-STC6USB4KHDBT) in the event installation is being made to the back of a
flat panel monitor. The steps for mounting the Transmitter or Receiver to the bracket are as follows:
1. Place the Transmitter/Receiver on the bottom bracket.
2. Line up the holes between the top bracket and the bottom bracket.
3. Install the flat-head countersink screws to secure the top bracket to the bottom bracket.
4. Mount the assembly to your display.
MK-STC6USB4KHDBT Bracket Installation
