NTI 4K HDMI EXTENDER OVER HDBASE-T
3
INSTALLATION
1. Connect a CAT6/6a/7 cable between the "HDBT OUT" on the Transmitter and the "HDBT IN" on the Receiver.
2. Connect the Transmitter to the video source with either a HDMI to HDMI cable, or HDMI to DVI (DVI video source) cable.
3. If USB devices are being extended, connect a USB cable with USB Male Type B Mini to the Transmitter and USB Type A male
connector to the PC.
4. If an RS232 device is being extended, connect a 3-wire RS232 cable between the DB9 connection on the PC and the 3-wire
connector on the Transmitter.
