NTI BRANDNAME AND DESCRIPTON
1
INTRODUCTION
The VOPEX-USBV-2-HUB (VOPEX) is a USB KVM Splitter and 3-Port Hub. It enables the control of one USB enabled CPU
through two separate USB keyboards, USB mice, and VGA monitors and it enables the connection of 3 additional USB devices
(other than keyboards or mice). Each user is able to have complete control of a CPU, provided they don't try to access it at the
same time. While the user access is controlled by four (4) separate modes of operation, both user monitors will show the same
image at all times. The 3 hub ports (for printer, scanner, camera, etc.) will be connected to the CPU at all times.
Types of User Input Devices Supported:
•
USB keyboard with Windows layout
•
USB keyboard with SUN layout
•
USB keyboard with MAC layout
•
USB Mouse - (up to 3 buttons)
•
USB IntelliMouse (scrollwheel)
•
Mouse-Trak
trackball
•
Logitech, Kensington and Microsoft Wheelmouse or Trackball on Mac CPUs with special drivers
•
Logitech Cordless Elite Duo keyboard and mouse
•
Crystal Vision keyboard with touchpad
•
Gyration
keyboard/mouse
•
NTI USB-PS/2 Adapter
•
NTI USB-SUN Adapter
Types of Shared Devices Supported:
•
Both low-speed and full speed USB devices are supported.
•
USB 1.1 compliant.
•
Plug-n-Play specification supported
Types of CPUs Supported:
Any USB CPU supporting USB version 1.0 or above including:
•
USB
WINxx
•
USB
MAC
•
USB
SUN
LIMITATIONS
•
The USB ports on the VOPEX are USB 1.1 compatible. Any USB 2.0 device connected to the VOPEX will be regulated to
USB 1.1 speeds.
MATERIALS
Materials included with this kit:
•
VOPEX-USBV-2 2-Port USB KVM Splitter
•
USB-AB-1M-ST 1 Meter Transparent USB A-B Device Cable
•
VEXT-3 3' M-F VGA Video Cable
•
120 or 240VAC @ 50 or 60Hz-5VDC/2.0A AC Adapter
