Network Technologies Incorporated ST-1FODVI-SC Скачать руководство пользователя страница 10

NTI XTENDEX DVI FIBER OPTIC EXTENDER 

 

7

 

 

TROUBLESHOOTING 

 

The monitor displays only black screen. 

 

Ensure that all plugs and jacks used by  external  power  supplies  are firmly connected. Ensure the blue LED is illuminated. 

 

Ensure that the DVI ports are firmly plugged-in to the PC and display. 

 

Ensure that the transmitter and receiver modules are connected correctly to the PC and display, respectively. 

 

Check if the PC and display are powered ON and properly booted. 

 

Reset the system by un-plugging and re-plugging the transmitter DVI port or receiver DVI port, or by un-plugging and re-
plugging the power cord plugs of the transmitter and receiver modules. 

 

Re-boot up the system while connecting the optical DVI extension module. 

 

Screen is distorted or displays noises. 

 

Check if the graphic resolution is properly set. Go to the display properties of Windows and check the settings. 

 

Ensure that the resolution is set to no greater than 1920x1200 at 60Hz refresh ratio. 

 

Reset the system. Disconnect and reconnect the optical DVI cables or 5V power adapters. 

 

For technical service, 

contact Network Technologies Inc at

 (800) 742-8324

  (800-RGB-TECH) or 

(330) 562-7070

 or visit our 

website at 

http://www.networktechinc.com

 

 

PRODUCT SPECIFICATIONS 

 

Fiber Optic DVI Extension Modules

 

 

D V I   s t a n d a r d   c o m p l i a n c e

 

S u p p o r t s   D V I 1 . 0 ,   f u l l y   implemented by fiber-optic communication 
and DDC2B by virtual DDC.

 

Video Connectors 

DVI-D Single-link 

Maximum Resolution 

1920x1200 at 60Hz 

Extension Limit  (multi-mode fiber) 

3280 feet (1000 meters) 

Graphic transmission bandwidth

 

Supports up to WUXGA at 60Hz, or 1.65Gbps bandwidth 

 

Fiber-optic connection

 

one SC receptacle so as to be connected with one SC simplex multi-mode 
fiber, having 9(8)/125ìm or 62.5(50)/125ìm core.

 

DDC connection

 

Virtual DDC by Auto EDID programming

 

Environmental Conditions 

 

Operating temperature

 

32°F-122°F  (0°C to 50°C)

 

Storage temperature

 

-4°F to 158°F (-20°C to 70°C). 

Humidity

 

5% to 85%

 non-condensing RH 

General 

 

Transmitter and Receiver Power 

100V or 240V at 50 or 60Hz-5VDC/2.0A via AC Adapter (1) 

Dimensions  WxDxH (In.)  

1.6x2.6x0.6

 

 

 

 

 

 

 

 

 

Содержание ST-1FODVI-SC












Отзывы: