WOS-2x1 / WOS-2x2
Rev. 6
Network Electronics ASA, Thorøya, 3204 Sandefjord, Norway, Tel.:+47 33 48 99 99 Fax: +47 33 48 99 98
E-mail: [email protected] - Web: http://www.network-electronics.com
Technical specifications are subject to be changed without notice
7
Figure 3: Overview of the WOS-C1 connector
module for 2x1 switch configuration
Figure 4: Overview of the WOS-2x2 connector
module for 2x2 switch configuration
If a module is placed in the position left to the module (as seen from the rear), a rubber plug must replace
the spring-loaded plastic shield of the fiber adapter.
3.2 Applying signals to the connector module
The optical connection is an SC/UPC connector with a return loss better than 40dB typ.
According to SMPTE specifications, the return loss shall be better than 26 dB.
WOS-2x1 and WOS-2x1L:
With reference to figure 3:
WOS-2x2 and WOS-2x2L:
With reference to figure 4:
Conn. mod. port
Switch port
Conn. mod. port
Switch port
OPT 1
Not used
OPT 1
Input 1
OPT 2
Output 1(*)
OPT 2
Output 1
OPT 3
Common
OPT 3
Input 2
OPT 4
Output 2(*)
OPT 4
Output 2
(*) Can also be used as input port, meaning that both 2x1 and 1x2 functionality can be implemented.
