Modular Telecom Router
Rev. 4
1
Product overview
The Modular Telecom Router is part of the VikinX
®
Modular product range,
offering up to 128x128 crosspoints for ITU G.703 CMI coded 140/155 Mbps
telecom signals.
This top of the line router provides a very compact frame, fully hot-swappable
architecture, built-in dual redundant power supply and fully redundant
controller functions.
Starting with the size of 32x32, the router can be expanded under operation
with 32x32 increments. Advanced control features like TCP/IP interface and
SNMP agent, as well as comprehensive surveillance of the router’s vital
parameters are possible via the well known GYDA-128 controller.
As for our well known VikinX
®
compact router series low power consumption
has been important.
VikinX
®
Modular provides a fully hot-swappable architecture, meaning that all
components are front loaded without any active components on the rear
panel.
VikinX
®
Modular provides all important 3
rd
party control interfaces allowing
the control of our routers through 3
rd
party management software. On top of
that does the Network Electronics’ THOR management package allow control
of the most common 3
rd
party routers. This enables you to utilise existing
routers and management systems from other manufacturers and still draw the
advantages of implementing VikinX
®
Modular in your routing application.
1.1
Product versions
The following versions of the VikinX
®
Modular Telecom Router are available:
140/155 Mbps Telecom router - 9RU
:
T3232-140/155M
VikinX
®
Modular router for Telecom rates 140/155 Mbps,
Non-reclocking, 9RU, equipped 32x32, expandable up to
128x128 in steps of 32x32.
T6464-140/155M
As above, but equipped 64x64.
T9696-140/155M
As above, but equipped 96x96.
T128128-140/155M
As above, but fully equipped 128x128.
140/155 Mbps Telecom router - 5RU
:
T3232-140/155S
VikinX
®
Modular router for Telecom rates 140/155 Mbps,
Non-reclocking, 5RU, equipped 32x32, expandable up to
64x64 in steps of 32x32.
T6464-140/155S
As above, but fully equipped 64x64.
8
