DA-T140
Rev.
6
On DA-SDI-C2 the electrical input signal is connected to the IN BNC and the electrical
outputs are connected to the O1 to O6 BNC’s. Please note that outputs 1 to 6 are non-
inverted, while outputs 7 and 8 are not available.
Figure 6: Overview of the DA-SDI-C2 connector module
Unused outputs should be terminated with 75 ohm.
DA-SDI-C2 does not have any GPI alarm outputs.
All unused outputs should be terminated.
4.1
Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the
sub-rack frame FR-2RU-10-2.
This manual is also available from our web site:
http://www.network-electronics.com/
network-electronics.com | 9
