DA-T140
Rev.
6
2
Specifications
Electrical Input
Data rate NRZ:
1 to 540 Mbps
Data rate RZ:
1 to 270 Mbps
Equalisation: Automatic
Cable equaliser can be bypassed to support bitrates down to
1Mbps.
Impedance: 75
ohm
Return loss:
>15dB (500kHz – 270MHz)
Signal level:
nom. 1000mV
approx. 200mV min. when equaliser switched to Bypass
Connector: BNC
Electrical Output
Number of outputs:
8 (6)
Connector: BNC
Impedance: 75
ohm
Return loss:
>15dB (500kHz – 270MHz)
Jitter: max
0.2UI
Peak to peak signal level:
1V ± 0.1V
Signal polarity
6 non inverting, 2 inverting
Features
Input equaliser:
EQ bypass for low bit rates
Electrical
Power:
+5V DC / 3W Max.
Control:
Control system for access to setup and module status with BITE
(Built-In Test Equipment) for use with GYDA Control System.
Supported standards
ITU-T: ITU-T
G.703.
AES:
AES-3id (with EQ switched off)
network-electronics.com | 5
