ASI-IP-GTW User's Manual
Page
38
3.5.6
Security
Figure 11 shows the sub-page for user security (password protection).
Figure 15. Time setting sub-page
Enable Password Protection:
Mark this to enable password protection.
If password is not set, it will use the factory default password.
Factory default:
Administrator login:
admin
Password:
salvador
Old Password:
To be able to set a new password, the user must know
the old password.
New Password:
Type the new password. Allowed length is 0 to 20
characters.
Retype New Password:
Retype the new password as a security
measure.
Change Password:
Click this button to activate the new password.
Note:
If you forget the password that has been configured, you will
need to log on to the unit through the RS232 port. When you are logged
on, type “userdb factory_defaults”. This will reset the password to the
factory defaults detailed above.
