Network Appliance VikinX A128128M, Руководство пользователя, Страница: 17 / 34

Modular Analog Audio Router Rev. 8
3.4.1 Card insertion
The frame is equipped with plastic guide rails to align the Syscon cards into
their respective positions. Slide the card into the plastic guide rails inside the
frame until the red handle is close to the frame front. A detailed description of
the last part of the insertion process is shown in the figure below.
On the top of the card tray, there is a hole above each module slot. When the
tip of the handle is just below this hole, start to push the handle downwards
as in the figure. The tip of the handle enters the hole and the card is locked
and proper contact ensured when the handle is in downright position.
Do not use excessive force; the card should enter easily –
proper insertion is almost effortless .
3.4.2 Card removal
To remove a module card from the sub-rack frame, release the card by
moving the red handle until it is in horizontal position, as shown in the figure
below. Then pull the card out of the sub-rack with the red handle.
17