netvox ZB11C1, Руководство пользователя

Страница: 11 / 17

10
5-7. Battery
ZB11C1 will send a low-power report to the ZigBee network when the operating voltage is lower than 2.1V by
default.
The related data:
 Power configuration cluster (ID:0x0001)
 Battery voltage attribute (ID:0x0020)
The reporting voltage can be adjusted. There are 4 voltages for choosing: 2.4V/ 2.3V/ 2.2V/ 2.1V.
It is recommended that the minimal reporting internal is longer than 3-minute.
5-8. Infrared Sensor Detection and Report
When infrared sensor detects a movement, ZB11A1 will send the report to the CIE device and go to Occupied
status. The indicator will flash
red once . In Occupied condition, ZB11A1 will detect the further movement
after 84 seconds (120 * 70%) by default. Until no additional movement is detected within the period of 120
seconds, ZB11A1 will go to Unoccupied condition and send the report to ZigBee network.
 After ZB11A1 joins the ZigBee network, the infrared sensor will not be active within 1 minute.
 Under the circumstances ZB11A1 is not in a ZigBee network, it will start to join a network after the
ZB11A1 detects a movement.
 Users could change the detecting sensitivity by adjusting the Sensor Sensitivity Adjuster.
Clockwise adjustment → Higher sensitivity
5-9. Movement Detection and On/Off Control
When infrared sensor detects the movement and the surrounding light intensity is low, it sends a light-on
message. In this condition, ZB11C1 will detect the further movement after 84 seconds (120 * 70%) by default.
Until no additional movement is detected within the period of 120 seconds, ZB11C1 will send a light-off
message.
 Users could change the light sensitivity by adjusting the Light Sensitivity Adjuster.
Clockwise adjustment → Brighter
5-10. Tamper Alarm
ZB11C1 features tamper alarm. When the cover is opened, ZB11C1 will notify the central security unit, CIE
(Control and Indicating Equipment) device, to send a command to a Warning Device.