netvox ZB11C1, Руководство пользователя

Страница: 10 / 17

9
5-4. Binding
To make ZB11C1 work with the devices which support IAS ZONE/ On/Off/ Temperature measurement, users
need to bind the two devices:
Step1. Enable the binding feature of ZB11C1.
Press the Binding Key once → to broadcast the binding request for IAS ZONE
Press the Binding Key twice within 5 seconds → to broadcast the binding request for On/Off
Press the Binding Key 3 times within 5 seconds → to broadcast the binding request for
Temperature measurement
The indicator flashes
green while the Binding Key is pressed.
Step2. Enable the binding feature of the IAS ZONE/ On/Off/ Temperature measurement devices.
Step3. The indicator flashes
green 5 times after the binding is completed; otherwise, it flashes green 10
times .
5-5. Sleeping Mode
ZB11C1 is designed to go to sleeping mode for power-saving in some situations:
A. While the device is in the network → the sleeping period is 5 minutes; it will wake up every 5
minutes to keep online.
B. When it doesn’t find a network to join → ZB11C1 will go to sleeping mode. It will wake up every 15
minutes to search a network to join.
C. Once ZB11C1 was joined to a network and by any chance the network is no longer existed or the
device is out of the network → ZB11C1 will wake up every 15 minutes to find the network it joined
before.
It never keeps in sleeping mode and continues to find out a network every 15 minutes. This condition would
consume up to 30 times power spending compared to normal-operating status. To prevent this unwanted power
consumption, we recommend that users remove the batteries to power off the device.
5-6. Wake Up ZB11C1
To manually wake up ZB11C1, press the Auxiliary Key once.
 When ZB11C1 is in a ZigBee network → it will send out the device data, like IEEE address/Network
address, and the indicator will flash
green 5 times .
 When ZB11C1 was in a ZigBee network, but by any change it is offline → it will start to rejoin the
ZigBee network.
ZB11C1 will be activated for 2 minutes.