netvox ZB11A1, Руководство пользователя

Страница: 9 / 15

8
5-4. Sleeping Mode
ZB11A1 is designed to go to sleeping mode for power-saving in some situations:
A. While the device is in the network → the sleeping period is 5 minutes; it will wake up every 5
minutes to keep online.
B. When it doesn’t find a network to join → ZB11A1 will go to sleeping mode. It will wake up every 15
minutes to search a network to join.
C. Once ZB11A1 was joined to a network and by any chance the network is no longer existed or the
device is out of the network → ZB11A1 will wake up every 15 minutes to find the network it joined
before.
It never keeps in sleeping mode and continues to find out a network every 15 minutes. This condition would
consume up to 30 times power spending compared to normal-operating status. To prevent this unwanted power
consumption, we recommend that users remove the batteries to power off the device.
5-5. Wake Up ZB11A1
To manually wake up ZB11A1, press the Auxiliary Key once .
 When ZB11A1 is in a ZigBee network → it will send out the device data, like IEEE address/Network
address, and the indicator will flash
green 5 times .
 When ZB11A1 was in a ZigBee network, but by any change it is offline → it will start to rejoin the
ZigBee network.
ZB11A1 will be activated for 2 minutes.
5-6. Battery
ZB11A1 will send a low-power report to the ZigBee network when the operating voltage is lower than 2.1V by
default.
The related data:
 Power configuration cluster (ID:0x0001)
 Battery voltage attribute (ID:0x0020)
The reporting voltage can be adjusted. There are 4 voltages for choosing: 2.4V/ 2.3V/ 2.2V/ 2.1V.
It is recommended that the minimal reporting internal is longer than 5-minute.
5-7. Infrared Sensor Detection and Report
When infrared sensor detects a movement, ZB11A1 will send the report to the CIE device and go to Occupied
status. The indicator will flash
red once . In Occupied condition, ZB11A1 will detect the further movement