netvox R809A01, Руководство пользователя

Страница: 9 / 12

8
Example for MinTime/MaxTime logic:
Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, PowerChange=2W
MaxTime MaxTime
(MinTime) (MinTime)
0H 1H 2H
Note:
MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless PowerChange value.
Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, PowerChange=2W
MaxTime
MinTime MinTime MinTime MinTime
0H 15
th
M 30
th
M 45
th
M 1H 2H
Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, PowerChange=2W
MaxTime
MinTime MinTime MinTime MinTime MinTime MinTime
0H 15
th
M 30
th
M 45
th
M 1H 1H15
th
M 1H30
th
M
Remarks:
1. Compare the collected data with the last reported data. If the amount of data change is greater than ReportableChange, the
device will report based on the MinTime interval. If the data change is not greater than the last reported data, the device will
report based on the MaxTime interval.
2. For the energy consumption detection device, because the device is a constant power supply device, it is not recommended to
set the MinTime interval value too high in order to obtain the status information in real time. It is recommended to use the
default 2 seconds. If users need to control frequent report recommendations to adjust ReportableChange and MaxTime.
Collects data
13W
REPORT ON
Collects data
9W
Does not report
Collects data
10W
REPORTS
Collects data
REPORTS 35W
Collects data
REPORTS 39W
Collects data
REPORTS 50W
Collects data
REPORTS 10W
Collects data
REPORTS 11W
Collects data
9W
Does not report
Collects data
12W
Does not report
Collects data
14W
Does not report
Collects data
13W
Does not report
Collects data
14W
REPORT
Power Change
over 2W
Collects data
10W
Does not report
Collects data
9W
Does not report