background image

 

 

7. Important Maintenance Instruction 

Your device is a product of superior design and craftsmanship and should be used with care. The following suggestions will help you use the warranty 
service effectively. 
 
• Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that can corrode electronic circuits. In case the device 

is wet, please dry it completely. 

• Do not use or store in dusty or dirty areas. This can damage its detachable parts and electronic components. 
• Do not store in excessive heat. High temperatures can shorten the life of electronic devices, destroy batteries, and deform or melt some plastic parts. 
• Do not store in a cold place. Otherwise, when the temperature rises to normal temperature, moisture will form inside, which will destroy the board. 
• Do not throw, knock or shake the device. Rough handling of equipment can destroy internal circuit boards and delicate structures. 
• Do not wash with strong chemicals, detergents or strong detergents. 
• Do not apply with paint. Smudges can block debris in detachable parts and affect normal operation. 
• Do not throw the battery into a fire to prevent the battery from exploding. Damaged batteries may also explode. 
 
All of the above suggestions apply equally to your device, battery and accessories.   
If any device is not working properly. 
Please take it to the nearest authorized service facility for repair.

 

 

Содержание R718PB15








Отзывы: