5
5.
Data Report
After power on, the device will immediately send a version packet report, and then send another
report with the data of ORP value
after 20 seconds
.
The device sends data according to the default configuration before any other configuring.
MaxTime: Max Interval=3600s (60min)
MinTime: The MinTime configuration is not available. But the software has restriction, MinTime
must be configured a number greater than 0.
Note:
1.Report interval is based on the factory default.
2.R718PA9 reports the ORP value.
The device reported data parsing please refer to
Netvox LoraWAN Application Command document and Netvox Lora Command Resolver
http://www.netvox.com.cn:8888/page/index
Report Con figuration
(1)
Configure R718PA9 device parameter MaxTime = 1min
Downlink: 0157000A003C0000000000
Device Return:
8157000000000000000000 (configuration success)
8157010000000000000000 (configuration failure)
(2)
Read R718PA9 device parameter
Downlink: 0257000000000000000000
Device Return:
8257000A003C0000000000 (device current parameter)
Description
Device
Cmd
ID
Device
Type
NetvoxPayLoadData
ConfigReport
Req
R718PA9
0x01
0x57
MinTime
(2bytes Unit: s)
MaxTime
(2bytes Unit: s)
Reserved
(5Bytes,Fixed 0x00)
ConfigReport
Rsp
0x81
Status
(0x00_success)
Reserved
(8Bytes, Fixed 0x00)
ReadConfig
ReportReq
0x02
Reserved
(9Bytes, Fixed 0x00)
ReadConfig
ReportRsp
0x82
MinTime
(2bytes Unit: s)
MaxTime
(2bytes Unit: s)
Reserved
(5Bytes,Fixed 0x00)
