background image

 

 

1.

 

Introduction 

 

 
This device is a simple positioning function (which can detect the position status of the device), and 
periodically reports RSSI and SNR. 
 
The  information  is  processed  by  the  gateway,  and  the  location  range  of  the  device  is  detected 
according  to  the  reported  RSSI  and  SNR  information.  The  device  applies  SX1276  wireless 
communication  module.  For  reported  RSSI,  SNR  information  location  status,  the  acceptance 
sensitivity is -136 dBm (LoRa, Spreading Factor = 12, Bit Rate = 293 bps). 
 
LoRa Wireless Technology: 
LoRa  is  a  wireless  communication  technology  dedicated  to  long  distance  and  low  power 
consumption.  Compared  with  other  communication  methods,  LoRa  spread  spectrum  modulation 
method  greatly  increases  to  expand  the  communication  distance.  Widely  used  in  long-distance, 
low-data  wireless  communications.  For  example,  automatic  meter  reading,  building  automation 
equipment,  wireless  security  systems,  industrial  monitoring.  Main  features  include  small  size,  low 
power consumption, transmission distance, anti-interference ability and so on. 
 
LoRaWAN: 
LoRaWAN  uses  LoRa  technology  to  define  end-to-end  standard  specifications  to  ensure 
interoperability between devices and gateways from different manufacturers.   

 

 

 

 

 

 

 

 

 

Содержание R718MA










Отзывы: