10
6. Installation and Precaution
R712_User_Manual_CHS_20200713
R712_User_Manual_CHS_20200713
1.Take out the temperature and humidity sensor
and the base of it from the housing (as shown
below).
Steps:
Press the buttons on both sides of the base (as
shown in the below picture), then gently take out
the sensor inside the housing.
Note:
Please keep the device from metal or other
electrical equipment to avoid affecting the
wireless transmission of the device.
2. Insert the battery into the sensor, then replace
the sensor and base into the housing.
Note that the protruding part of the base should be
aligned with the concave part of the housing (red
frame below).
3. Unscrew the nut of the red circle below and
lock the device to the tube as shown below.
The outdoor temperature and humidity sensor
(R712) is suitable for the following scenarios:
⚫
Smart agriculture
⚫
Environmental monitoring
When it is necessary to detect temperature or
humidity outdoors
4. When the temperature and humidity detected
by R712 is compared with the last reported
values, when the temperature change is
exceeded 1°C (default) or the humidity change
is exceeded 1%(default),it will report current
values.
5
.
Installation height recommendation:1-1.5 m
6.Installation ambient temperature: -20C°~55°C
