11
6. Installation
(
1) This product does not have a waterproof function. After the screening is completed, please place
it indoors.
(2)
The dust at the equipment installation position needs to be wiped clean and then pasted.
(3)
The battery installation method is as shown below (the battery has a "+" side facing outward)
(Users may need a flat blade screwdriver to open the battery cover.)
1.
Remove the 3M release paper on the back of the
device and attach the device to the smooth wall
(please do not stick it to the rough wall to avoid
falling off after a long time use).
Note:
Wipe the wall surface before installation to
avoid dust on the wall surface and affect the
paste capability.
Do not install the device in a metal shielded
box or other electrical equipment around it to
avoid affecting the wireless transmission of the
device.
2. When the doorbell (R313M) button is
pressed, the message "Alarm" is sent.
When the device reports data periodically, it
restores the "normal" status and sends
"normal" status information.
Note:
With the sound and light alarm (R602A),
the audible and visual alarm will ring the
door after the doorbell is pressed.
