background image

 

 

10 

6. Installation 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

 

Remove the 3M release paper on the back of the device and 

attach the device to the smooth wall (please do not stick it to 

the rough wall to avoid falling off after a longtime usage). 

Note:   

 

The distance between the magnet and the reed switch must 

be less than 2cm. 

 

Wipe the wall surface before installation to avoid dust on 

the wall surface that affect the effect of the paste. 

 

Do not install the device in a metal shielded box or other 

electrical equipment around it to avoid affecting the 

wireless transmission of the device.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The sensor (R313CB) can be applied to the following scenes: 

 

Office building 

 

School 

 

Shopping mall 

 

Villa 

The occasions with glass windows or glass doors. 

2. If R313CB with the glass sensor detects that the window is 

opened (the magnet is separated from the main body) or 

closed (the magnet and the main body are closed), the data 

will be sent immediately. 

3. If the glass breaking vibration triggers the glass sensor, the 

data will be sent immediately. 

4.

 

If it detects the battery voltage exceeding the variation value 

at MinTime, the data will be sent immediately. 

5.

 

Even if the window status does not change or the no broken 

glass is detected, the data will be sent regularly according to 

the Max Time. 

Note: 

 

When either the main body or the external sensor is in the 

open state, the report status1 will be 1. 

The report status1 will be 0 only when both of the main 

body and the external sensor are closed. 

 

 

When the glass break detector is triggered,   

the report status2 will be 1. 

R313CB 

Magnet   

Main Body 

Installation Diagram     

Содержание R313CB













Отзывы: