3
3. Main Features
Compatible with LoRaWAN
2 section 3V CR2450 button battery powered
Detect battery voltage and the device motion status
Compatible with LoRaWANTM Class A
Frequency hopping spread spectrum technology
Configuration parameters can be configured through third-party software platforms, data can be read and alarms can be set via SMS text and
email (optional)
Available third-party platform: Actility / ThingPark, TTN, MyDevices/Cayenne
Low power consumption and long battery life
Note *:
Battery life is determined by the frequency and other variables reported by the sensor, please refer to
http://www.netvox.com.tw/electric/electric_calc.html
On this website, users can find the battery life of various models in different configurations
4. Set up Instruction
On/Off
Power on
Insert batteries.
(users may need a flat blade screwdriver to open); insert two sections of 3V CR2450 button batteries and close the
battery cover.)
Turn on
Press any function key till green and red indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold both function keys for 5 seconds till green indicator flashes for 20 times.
Power off
Remove Batteries.
Note:
1. Remove and insert the battery; the device will memorize previous on/off state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor inductance and other
energy storage components.
3. Press any function key and insert batteries at the same time; it will enter engineer testing mode.
Network Joining
Never joined the network
Turn on the device to search the network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
(not at factory setting)
Turn on the device to search the previous network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
First two mins:wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send request.
Note: Suggest to remove batteries if the device is not used to save power.
Suggest to check the device verification information on the gateway with your platform server provider.
Function Key
Press and hold for 5
seconds
Restore to factory setting / Turn off
The green indicator flashes for 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: green indicator flashes once and sends a report
The device is not in the network: green indicator remains off
