The grounding wire conductive screw is located at the right end of rear panel, and the power switch, fuse,
power supply socket is just beside ,whose order goes like this, power switch is on the left ,power supply
socket is on the right and the fuse is just between them.
Connecting Power Cord
User can insert one end into power supply socket, while insert the other end to AC power.
Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt independent way, say, share
the same ground with other devices. When the device adopts united way, the grounding resistance
should be smaller than 1Ω.
Caution:
Before connecting power cord to NetUP Streamer HD v.3, user should set the power switch to “OFF”
.
2.4 Signal Cable Connection
The signal connections include the connection of input signal cable and the connection of output signal
cable. The details are as follows:
2.4.1 HDMI input cable illustration:
2.4.2 Network Cable illustration (CAT5):
