Netum RS-8000, Руководство пользователя

Страница: 9 / 14

(8)
Idle time
Scanner will turn to sleep after idle/inactive for 1min
Scan "Disable module Idle time" before you doing any other setup from this
section.
Get Battery Volume
Scan below command barcode to get battery rough volume.
1) Voltage < 3.5V, Low battery Volume, there will have 5 beeps after each
scan. Scanner can not be able to read any barcodes.
2) 3.7V< Voltage < 3.5V, Low battery Volume, there will have 2 beeps after
each scan. Scanner still be able to read barcodes.
3) Voltage >4.2V , Full Volume
Power Off Disable Sleep Mode
* 3mins
1Hour
Battery Rough Volume