25
1
2
Model:
Netti Vision
Language:
English
Version:
2021-06
My-Netti.com
If the brake doesn’t brake properly:
To adjust the wire on one or both sides,
adjust the foot screw 2 – 4 rounds out.
Then recheck
the brakes.
If the wire is too loose:
Adjust the foot screw all the way in. Tighten the
wire by loosening the wire clamp before pulling the
wire further through it. Tighten the wire clamp, and
adjust the foot screw out again.
1 pc 10 mm open-end spanner.
Tighten lock nut when finished
adjusting.
6.12 DRUM BRAKE
Operating and applying the brakes
Netti Vision comes standard with pedal parking
brakes.
For activating and locking the parking brake push
down the the red brake pedal.
•
To activate:
Press down.
•
To de-activate:
Pull up.
Don’t leave the user in the wheelchair
without activating the parking brake.
Netti Vision comes with hand-and-arm operated
hub brakes for attendant as an option, to allow
regulation of speed on hills and whilst manoeuvring
the chair. These are located on the push handles.
• To apply the brakes, pull the brake levers (
1
)
evenly and smoothly towards handle and bring
the wheel-base to a stop.
