24
My-Netti.com
Model:
Netti Vision
Language:
English
Version:
2021-06
Mounting the arm support:
• Release lock handle.
• Push arm support straight down in a vertical
direction into the insert sleeve.
• Fix the nut to the vertical profile below the sleeve
at a maximum adjusted arm support height.
Dismounting the arm support:
• Remove the nut limitng the height.
• Release the lock handle.
• Pull the arm support in a vertical direction
up out of the sleeve.
Placing the arm support in lower position
allows sideway transfer.
Never lift the chair holding onto
the arm supports.
6.11 ARM SUPPORT
Adjusting the height of the arm support:
• Lift up the release handle on the arm support.
• Raise or lower according to your needs.
• Tighten the release handle.
At the end of the vertical bar there is a black nut
which is to be placed in another position if you want
to avoid adjusting the arm rest above a specific point
(your required position).
For security and stability reasons do not lift
the whole chair with a person in it. In case
you do so, the black nuts will avoid the of
armrest bar sliding out of the bracket if the
locking mechanism is not tighten.
Please be aware while mounting that there is
a left-side and a right-side arm support.
