25
My-Netti.com
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
Calf support adjustments
the calf supports are height and depth
adjustable. the calf supports are to be
adjusted in a height and depth that prevents
the feet from sliding down from the foot
plate.
to adjust the height, loosen the nut
A
on
the calf support bracket and slide it into
required position before fixing the screw.
10 mm open end spanner
to adjust in depth of
the calf pad, loosen the screw
B between
the calf support
and bracket and reposition
it to required position before fixing the
screw again.
13 mm Allen key
Never stand on the foot plates!
Never lift the wheelchair by the
leg supports.
MOUNTING OF ANGLE ADJUSTABLE LEG
SUPPORT GRANDIS:
the angle adjustable
leg support Grandis
is the standard leg
support for
Netti iii HD.
it is swingable and removable. it is height
adjustable and comes with height- and
depth adjustable calf support. the foot
plates are hinged, and can be angled in
fixed positions. as a standard the foot
plates come with a lock connecting the
2 plates which makes the plates stronger
and reduces maintenance. if locking is not
wanted, the bolt can be removed by using
an allen key.
Mounting of the leg support:
• Fold the foot plates up.
• Hold the leg support on the top joint,
and place it in the pull-out-piece in an
angle as shown in the picture below.
• Swing the leg support inwards and push
slightly downwards until it goes into
locked position.
to adjust the angle of the leg support
simply release the red lever and lift or
lower. the leg support will stay in the
position where you lock the lever.
