22
My-Netti.com
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
The anti-tips are delivered adjusted
according to ordered main wheel size
in standard position. If other
adjustments are carried out, anti-tips
have to be adjusted accordingly.
Adjusting anti-tip
the anti-tips must be adjusted whenever
the position or dimension of the main
wheels are changed.
Correctly adjusted anti-tips should be
positioned just on the inside of the radius
of the main wheel. anti-tips are adjusted as
follows:
• Unfix the locking clamp on the anti-tip bar
using an allen key.
• Pull or push the bar to required position.
• Fix the locking clamp.
• Do the same procedure on the opposite
side.
6 mm Allen key
Check that both anti-tips have the
same length. The gap between the
anti tip wheels and the floor must be
20 - 30 mm.
If the anti-tip is positioned on the
outside of the main wheel radius, it
will interfere with curbs and stairs.
The anti-tip should always be used
for the safety of the user.
6.11 ADJUSTING ARM SUPPORTS
• Turn the arm support release handle to
the side and hold.
• Adjust the armrest to the required height
and release the handle. lift or lower the
armrest slightly until it locks.
The arm pad and locking screw are
set in the middle position. This can be
adjusted to fit the user.
6.12 CUSHIONS
Cushions are fixed and adjusted
on the wheelchair using the Velcro.
It is imperative to correctly set-up
the cushion in order to ensure good
seating comfort
The cushion covers are washable and
thereby reusable. Follow the
instruction on the back of the
cushion for correct maintenance and
washing of the cushion.
