netta OL20-B270R, Инструкция по эксплуатации

Страница: 16 / 20

13
III.Cautions!
1. Do not remove the float from the water
tank; otherwise, the machine will not stop
working when the water tank is full. Then the
water will be overflow that maybe make
damage to your floor.
2. Drain the water completely when water tank is full and reset your setting.
3. If the water tank is dirty, clean it by cool or warm water. Don't use cleaner, steel wool,
chemical rag duster, gas oil, benzene, thinner or other solvent to clean it, otherwise, it will
damage the water tank and lead to leakage.
4.Please use two hands to
put the water tank into the
machine correctly, or the
water full indicator will still
show red and the machine
can not work.
IV. Continuous drainage:
1. Open the cover on the back of the dehumidifier.
2. Take out the water tank
3. Insert a PVC pipe with 9.5mm (inner diameter 9.5mm), and the recommended length is
300mm; put the other side into a container, such as a bucket.
Steps:
Remove the rubber plug of the water
outlet ,then insert one end of water pipe into the
water outlet, and put the other end of pipe on
the ground
Make sure the other end of water pipe must be
lower than water outlet