2.
The position of the fan head can be changed by loosening the setting
screw (21) and then fixing again.
Check for a firm and proper fixing.
Before starting this assembly, please
check whether there is a protective
plastic sleeve on the motor shaft (8).
Should it be present, remove it by
pulling it forward.
1.
Loosen the four screws from the
front of the motor housing (11) with a screwdriver (Fig. 2)
2.
Place the rear grill (6) on the motor shaft (8) and fasten the rear grill
onto the motor with four screws.
3.
Make sure the rear grill fits securely against the motor housing and that
the handle (7) is at the top.
4.
Loosen the securing screw (4) on the fan blade (3). Slide the fan blade
onto the motor shaft (8) with the shaft sleeve facing the motor.
5.
Align the securing screw with the flat groove in the motor shaft and
tighten with a screwdriver.
6.
Ensure the fan blade (3) is fixed on the motor shaft (8).
7.
Remove the small securing screw from the front grill. Open the grill
clamps on the front grill (1) and set the front grill with the fixed holder
of the rear grill (6). Mount the front grill to the rear grill and fix both
grilles with the clamps. Use a screwdriver for fixing the screw and nut
(Fig. 4).
