NVF-200SE/PD Power over VDSL Master/Slave USER’S MANUAL Ver. B.4
18
Chapter 4.
About performance
4.1 Auto and manual data speed selector description:
NVF-200SE is a VDSL solution which supports real plug & play and can do auto and manual selection of the data
speed, the setting of the data speed depends on the phone cable limit length, they can support 5M/15M/25Mbps
symmetrical data service. If NVF-200SE try to link at the data speed of 15Mbps but fails to do so, then NVF-200SE
data speed must be lowered due to the limitation of the phone cable length. If the cable length is unsure, then auto
selection of the data speed at the default setting is recommended. Power must be unplug before changing the data
speed then power on and wait for VDSL to link again at the correct data speed function.
Speed mode limitation:
5M/5M mode within 1km (3280ft)
15M/15M mode within 800m (2624ft)
25M/25M mode within 500m (1640ft)
Note:
1. We recommend phone cable that must meet Cat. 3 standard or above and without clustering.
2. The performance data above is for reference only, the actual distance will vary on the quality of the copper wire
and environment factors. We recommend using 24~26 gauge and Cat. 3 standard or above phone wiring
,
otherwise the above guarantee will be void.
