NV-600LI/RI Managed Industrial Grade VDSL2 CO/CPE Router USER’S MANUAL Ver. A4
83
Channel Configuration Settings:
Setting
Description
Channel Number
To which bearer channel number shall the settings apply?
Channel 0
Direction
To which direction shall the settings apply?
Upstream
Downstream
Min Data Rate
Minimum Payload Data Rate values
Max Data Rate
Maximum Payload Data Rate values
Max Interleave Delay
Maximum
Interleave Delay values (set from 0 to 255ms)
•
Click APPLY at any time during configuration to save the information that you have entered.
•
Click CANCEL to exit from this page without saving the changes.
Notes:
1.Regarding the interleave delay value time function for anti-noise purpose, due to the noise of each environment are different,
so you could adjust interleave delay value when filed environment has heavy noise. Please note that increase interleave
delay time will reduce few vdsl2 bandwidth and depond on interleave delay time.
2. The Min and Max Data Rate function similar rate control function, you can limit rate for the VDSL2 port.
3. Please note you must deactivate then activate once on config port when you config VDSL2 arguments.
