8
4. Adopt four of the screws provided, and fasten the drive on the tray.
Tighten each screw to fasten the drive snugly to the drive tray.
Do not tighten the screws overly.
5. Insert the drive module into the NS388S enclosure correctly until its lever appears
to shut, and then press the lever to close until it clicks to ensure that the drive
module is within the enclosure.
6. Repeat steps 2 to 5 for further drives.
※
Do not force the levers to close while you insert drive modules into
the NS388S enclosure. If a lever does not close smoothly, draw out
and insert the drive module again, and then press the lever to close.
Clicks!
