22
CLI>
CLT>gr de
v
2 c1,c2 5 16
New Setting
Group-1: C0 Slot: 1 2 3 4
Group-2: C1 C2 Slot: 5 6 7 8 9 10 11 12 13 14 15 16
Save new group setting ok
CLI>
→Set the connector 1 and connector 2 and slot 5 to slot 16 as group 2
Syntax: CLI>gr dev 2 c1,c2 5 16 [Enter]
CLI>
CLI>gr clr
New Setting
Default zone configuration
Group-1: C0 C1 C2 C3, Slot: 1 2 3 4 ~ 24
Clear group configuration ok
CLI>
→Clear the Zone group setting
Syntax: CLI>gr clr [Enter]
CLI>
CLI>gr
Current Setting
Group-1: C0 Slot: 1 2 3 4
Group-2: C1 C2 Slot: 5 6 7 8 9 10 11 12 13 14 15 16
CLI>
After Power Cycle, check current setting
Syntax: CLI>gr [Enter]
Note: Reset needed for new setting to take effect
Note: After power cycle, new setting will be default zone configuration
