Netstor NA338TB3, Руководство пользователя

Страница: 5 / 21

2. Panel Layout
5
Go Top ↑
7. Thunderbolt 3 connectors
。
Connecting Thunderbolt 3 cables to host and downstream device
8. PSU power button (“I” for enable, “0” for disable)
9. Power cord receptacle
。
Connecting Thunderbolt 3 cables to host
and downstream device
10. Removable integrated plate drawer for Mac mini
11. Manually power on hole
。
To power on Mac mini manually by inserting stick to the hole
1. Drive Power LED
。
White - Power On Indicator
2. Drive Status LED
。
Flash Blue - Drive Accessing Indicator
。
Red - Drive Failure Indicator
3. Power on button
。
Blue – power on
4. Mute Button
。
Reset for buzzer beeping
5. Fan Status LED
。
Normal – Green
。
Failure – Red (too slow RPM or stop)
6. Temperature LED
。
Normal – Green
。
Over 50°C – Red
7
8
10
11
9
1
3 4
5
6
2
When Mac mini is inside the Netstor unit, press
and hold the power button for three seconds
until the LED button shows blue light; the
built-in solenoid actuator at rear of enclosure
will push Mac mini's power button to have Mac
mini and whole system power on.
Note:
The NA338TB3 chassis supports SGPIO. When any SSD/HDD fails, the
red LED indicator on the tray will light. The SGPIO function will be
effective when the RAID card supports SGPIO function (for example,
Areca’s RAID card).