4. Operation and Verification
4.1 Connection and System Power On/Off
4.1.1 Embedded Mac mini Application
11
This section will give info on connection between host computer and Netstor unit, and
will also guide you how to power on/off the system. For embedded Mac mini application,
see section 4.1.1. As for host computer connecting to Netstor unit externally, please
refer to section 4.1.2.
1. After the NA338TB3 storage enclosure is connected to the power source by the power
cord, turn the power switch of NA338TB3's PSU at rear of the chassis to "I" position to
enable the power supply unit.
2. As the embedded Mac mini is connected to Netstor unit by Thunderbolt 3 cable, press
and hold the LED power button in front of NA338TB3 for three seconds until the LED
button shows blue light. The built-in solenoid actuator at rear of enclosure will push
Mac mini's power button to have Mac mini and whole system be powered on.