Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Инструкция по установке и настройке

Страница: 776 / 866

Configuring CMS Logs
776 Netscape Certificate Management System Installation and Setup Guide • October 2001
To delete a listener from the CMS configuration:
1.
In the Log Event Listener Management tab, select the listener you want to
delete and click Delete.
2.
When prompted, confirm the delete action.
The CMS configuration is modified. If the changes you made require you to
restart the server, you will be prompted accordingly. Don’t restart the server
yet; you can do so after you’ve made all the required changes.
Step 4. Create New Listeners
This generally not required. However, if you want to create a new listener, follow
the procedure in this section.
Adding a log-event listener to the CMS configuration involves creating a new
instance of an already registered log plug-in module, assigning a unique name for
the instance, and entering appropriate values for the parameters that define the
module you want to create an instance of.
When you add a listener, the CMS configuration gets updated with the relevant
information. Keep the following points in mind:
• When naming a listener, be sure to formulate the name using any combination
of letters (aA to zZ), digits (0 to 9), an underscore (_), and a hyphen (-); other
characters and spaces are not allowed. For example, you can type
Audit_Log_Listener
or
AuditLogListener
as the instance name, but not
Audit Log Listener
.
• The status of the listener, enabled or disabled, depends on whether you check
or uncheck the
enabled
parameter; only an enabled listener records events.
Figure 23-2 shows the log modules registered with a Certificate Manager. If you
have registered any custom policy modules (see “Registering a Log Module” on
page 792), they too will be available for selection.