Installation
Getting Started – New NetPilot Range
7
Choosing a location for installation
When installing your NetPilot ensure:
It is accessible and cables can be easily connected.
Ensure the unit is placed on a cool surface.
It is out of direct sunlight and away from sources of heat.
Cabling is away from power lines, fluorescent lighting fixtures
and sources of electrical noise such as radios, transmitters and
broadband amplifiers.
Water or moisture should not enter the case of the unit.
Airflow around the unit and through the vents in the side of the
case is not restricted. We recommend that you provide a
minimum of 25 mm (1 inch) clearance around the unit.
Do not rest objects directly on top of the unit.
Installation Requirements
The following items are needed in order to install the NetPilot:
A suitable cable for connection to the LAN or workstation (if only
a workstation is attached to the unit).
For connecting to a remote site over an ADSL modem or a
leased line, a suitable Internet cable is required.
