Netopia R7200, Руководство пользователя

Страница: 44 / 258

6-2 User’s Reference Guide
may be using the router to connect to more than one ser vice provider or remote site.
■
The System Configuration menus display and permit changing:
■
Network protocols setup. See “IP Setup and Network Address Translation” on page 10-1 , “IPX Setup”
on page 11-1 , and “AppleTalk Setup” on page 12-1 .
■
Filter sets (firewalls). See “Security” on page 14-1 .
■
IP address ser ving. See “IP address ser ving” on page 10-21 .
■
Date and time. See “Date and time” on page 8-12 .
■
Console configuration. See “Connecting a console cable to your router” on page 6-3 .
■
SNMP (Simple Network Management Protocol). See “SNMP” on page 13-12 .
■
Security. See “Security” on page 14-1 .
■
Upgrade feature set. See “Upgrade feature set” on page 8-14 .
■
The Utilities & Diagnostics menus provide a selection of seven tools for monitoring and diagnosing the
router's behavior, as well as for updating the firmware and rebooting the system. See “Utilities and
Diagnostics” on page 15-1 for detailed information.
■
The Statistics & Logs menus display nine sets of tables and device logs that show information about your
router, your network, and their histor y. See “Statistics & Logs” on page 13-4 for detailed information.
■
The Quick Menus screen is a shor tcut entr y point to 22 of the most commonly used configuration menus
that are accessed through the other menu entr y points.
■
The Quick View menu displays at a glance current real-time operating information about your router. See
“Quick View status over view” on page 13-1 for detailed information.
Connecting through a Telnet session
Features of the Netopia R7200 can be configured through the console screens.
Before you can access the console screens through Telnet, you must have:
■
A network connection locally to the router or IP access to the router.
Note: Alternatively, you can have a direct serial console cable connection using the provided console cable
for your platform (PC or Macintosh) and the Console por t on the back of the router. For more information on
attaching the console cable, see
“Connecting a console cable to your router” on page 6-3 .
■
Telnet software installed on the computer you will use to configure the router