manualshive.com logo in svg

Netopia R7100, Руководство пользователя

Netopia R7100 - устройство высочайшего качества, обеспечивающее быструю и стабильную сеть. Для получения дополнительной информации и настройки, загрузите бесплатное пользовательское руководство на manualshive.com. Этот manual поможет вам освоить все функции устройства и получить наилучший опыт использования.

Поделиться
Скачать
background image

Glossary  1

G

G

G

Gllllo

o

o

ossssssssaa

a

arrrryyy

y

access line:

A telephone line reaching from the telephone company central office to a point usually on your 

premises. Beyond this point the wire is considered inside wiring.

analog:

In telecommunications, telephone transmission and/or switching that is not digital. An analog phone 

transmission is one that was originally intended to carr y speech or voice, but may with appropriate 
modifications be used to carr y data of other types.

ANSI (American National Standards Institute):

Devises and proposes recommendations for international 

communications standards. See also

 CCITT

.

AppleTalk: 

A comprehensive network system designed and developed by Apple Computer, Inc. AppleTalk 

allows many different types of computer systems, printers, and ser vers to communicate on a variety of cabling 
schemes, including LocalTalk and Ethernet cabling. In this manual, AppleTalk refers especially to the protocols 
or rule sets that govern this communication.

AppleTalk address: 

A unique identifier for each device using AppleTalk that allows information to be sent and 

received correctly.  An AppleTalk address always includes a network number wherever two or more AppleTalk 
networks are connected together by routers. 

AURP (Apple Update-based Router Protocol): 

An enhanced AppleTalk routing protocol. AURP provides 

improved suppor t for AppleTalk over wide area networks (WANs) and tunneling through non-AppleTalk (IP) 
networks. AURP features include network number remapping, clustering of remote network numbers, and hop 
count reduction.   

backbone: 

A network topology consisting of a single length of cable with multiple network connection points. 

bandwidth:

The range of frequencies, expressed in Kilobits per second, that can pass over a given data 

transmission channel within a network. The bandwidth determines the rate at which information can be sent 
through a channel - the greater the bandwidth, the more information that can be sent in a given amount of time.

BAP (Bandwidth Allocation Protocol):

Protocol that manages the dynamic bandwidth allocation of 

implementations suppor ting the PPP Multilink protocol. This is done by defining the Bandwidth Allocation 
Protocol (BAP), as well as its associated control protocol, the Bandwidth Allocation Control Protocol (BACP). BAP 
can be used to manage the number of links in a multilink bundle. 

baud rate:

The rate of the signaling speed of a transmission medium. 

bit:

A binar y digit; the smallest unit of data in the binar y counting system. A bit has a value of either 0 or 1.

bits per second (bps):

A measure of the actual data transmission rate. The bps rate may be equal to or greater 

than the baud rate, depending on the modulation technique used to encode bits into each baud inter val. The 
correct term to use when describing modem data transfer speeds.

bps:

See 

bits per second

.

branch: 

A length of cable in a star network that goes from the center of the star to a wall jack.

broadcast:

A network transaction that sends data to all hosts connected to the network.

burstiness:

Data that uses bandwidth only sporadically; that is, information that does not use the total 

bandwidth of a circuit 100 percent of the time. During pauses, channels are idle; and no traffic flows across 
them in either direction. Interactive and LAN-to-LAN data is bursty in nature, because it is sent intermittently, 
and in between data transmission the channel experiences idle time waiting for the DTEs to respond to the 
transmitted data user’s input of waiting for the user to send more data.

Содержание R7100



































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для R7100

IBM 2210 Installation And Initial Configuration Manual preview
2210
Бренд: IBM Страницы: 72
D-Link DSL-2740B Installation Manual preview
DSL-2740B
Бренд: D-Link Страницы: 10
3Com TokenLink Velocity 3C319 Release Note preview
TokenLink Velocity 3C319
Бренд: 3Com Страницы: 2
XAVI Technologies Corp. 7721r User Manual preview
7721r
Бренд: XAVI Technologies Corp. Страницы: 71
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Бренд: Funkwerk Страницы: 2
ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series User Manual preview
ADSL/ADSL2/ADSL2+ Router 660R-6xC Series
Бренд: ZyXEL Communications Страницы: 282
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Бренд: Garland Страницы: 30
NetComm 3G25W-R Manual preview
3G25W-R
Бренд: NetComm Страницы: 69
iGateWeb.com iGate User Manual preview
iGate
Бренд: iGateWeb.com Страницы: 6
Axis P3365-V Installation Manual preview
P3365-V
Бренд: Axis Страницы: 98
AMX NXF Dimensional Drawing preview
NXF
Бренд: AMX Страницы: 1
DIGIWEB Box 7360 Quick Setup Manual preview
Box 7360
Бренд: DIGIWEB Страницы: 16
ACTi LPR-100 Quick Installation Manual preview
LPR-100
Бренд: ACTi Страницы: 14
Alfa Network AC1200R Setup Manual preview
AC1200R
Бренд: Alfa Network Страницы: 11
Digi 9P 9360/9750 User Manual preview
9P 9360/9750
Бренд: Digi Страницы: 75
Optus Ultra WiFi Booster Quick Manual preview
Ultra WiFi Booster
Бренд: Optus Страницы: 8
Weidmuller IE-SW-VL09T-6TX-3SC Hardware Installation Manual preview
IE-SW-VL09T-6TX-3SC
Бренд: Weidmuller Страницы: 14
Extron electronics Network Adapter AC AAP Specifications preview
Network Adapter AC AAP
Бренд: Extron electronics Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды