background image

13-24  User’s Reference Guide

Follow these steps to configure the new packet filter set:

1.

Select 

Filter Set Name

 and enter a descriptive name for the filter set.

2.

To change the for warding action of filters in the filter set, select 

Show Filters/Change Action on Match

 

and press Return. The Show Filters/Change Actions on Match screen appears.

Select a filter and toggle the packet for warding action to 

Yes

 (pass) or 

No

 (discard).

         Add Packet Filter Set

         Filter Set Name:

         Show Filters/Change Action on Match...

         Append Filter...

         Remove Filter...

         ADD FILTER SET NOW                 CANCEL

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Configure an IPX Filter Set here. You must ADD FILTER SET NOW to save.

                      Show Filters/Change Actions on Match

                     Filter Name---------------------Forward

                     Filter 1                          No

                     Filter 2                          No

                     <<NO MATCH>>                      Yes

Set whether filters forward or drop matching packets here.

Содержание R7100



































































































































































































































































Отзывы: