Netopia R2121, Руководство пользователя

Страница: 81 / 280

WAN and System Configuration 8-9
2. Select the Network Protocols item in the System Configuration screen and press Return.
3. Select the IP Setup item in the Network Protocols Setup screen and press Return.
To go back in this sequence of screens, use the Escape key.
System Configuration features
Smar tStar t may be all you need to configure your Netopia R2121. Some users, however, require advanced
settings or prefer manual control over the default selections that Smar tStar t automatically chooses. For these
users, the Netopia R2121 provides System Configuration options.
To help you determine whether you need to use the System Configuration options, review the following
requirements. If you have one or more of these needs, use the System Configuration options described in the
later chapters.
■
Two or more outgoing connection profiles to connect to more than one remote location (for example, to
connect to the Internet and to a network at another office).
■
System Configuration of dynamic IP address distribution through DHCP, MacIP, or BootP.
■
Customized incoming call profile to control received calls.
■
Scheduled connections.
■
Greater network security through the use of filters, CallerID, callback, and SecurID.
■
System Configuration of AppleTalk LAN settings.
■
System Configuration of connections to AppleTalk networks through the Internet or any IP network, using
AURP (AppleTalk “tunneling”).
■
System Configuration of connection profiles. See the table below for a par tial list of the options available
through System Configuration.
Layer Category Parameter Type Options Default settings
Protocol Layer IP Parameters Filter Sets: Basic Firewall
NetBIOS Filter
Receive RIP: Both
Transmit RIP: Off
IPX Parameters Path Delay: 1 second
NetBios Packet For warding: No
Incoming/outgoing Packet &
SAP filter: On
Periodic RIP/SAP timers: 60 seconds