Netopia R2121, Руководство пользователя

Страница: 145 / 280

AppleTalk Setup 12-11
Raising the tickle packet inter val does not ensure that the AURP tunnel is dropped or not brought up. If any
application on the local network generates AppleTalk traffic destined for the network at the remote end of
the AURP tunnel, the tunnel remains up. For example, if a host on the local network connects to a host on
the remote network using remote access software, the AURP tunnel remains up. The AURP tunnel also
remains up if a local user selects the Chooser and uses an AppleTalk ser vice that involves a remote zone,
such as mounting a remote AppleShare volume.
■
In many AppleTalk internets, individual AppleTalk networks come and go. Routers are designed to notify
each other at the end of their
Update Interval ever y time there's such a change in the network topology.
This will cause the Netopia's WAN link to be brought up. You can opt to minimize what may be unnecessar y
calls by changing the Update Inter val value to some larger value. At the end of this time window if there has
been a local AppleTalk network change the Netopia R2121 will call any remote AURP par tner and for ward
the new network information.
■
To enable network number remapping, select Enable Network Number Remapping and toggle it to Yes .
You should enable network number remapping if you plan on using AURP when connecting to unknown
AppleTalk networks. for example when “Accept Connections from Anyone” is enabled. With remapping, the
Netopia R2121 will substitute network numbers not used by your network for the numbers of other remote
networks. These safe remappings will only be used by local routers on your network; remote routers will not
be aware of the remapping.
When network number remapping is enabled, you must choose a safe range of network numbers as a
destination for the remapping. A safe range of network numbers does not intersect your local AppleTalk
network’s range of network numbers.
■
To choose a destination range for the remapping, select From under Remap into Range and enter a
star ting value. Then select To and enter an ending value. Make sure the range you choose is large enough
to accommodate all expected incoming AURP network numbers.
■
To improve the efficiency of remapping network numbers into a safe range, select Cluster Remote
Networks and toggle it to Yes . This setting takes any number of remote networks being remapped and
causes them to be remapped into a continuous range.
■
To override the AppleTalk maximum limit of 15 hops, select Enable Hop-Count Reduction and toggle it to
Yes . Hosts on a local AppleTalk network will then “see” AppleTalk destinations across the IP tunnel as
being only one hop away.
AppleTalk allows a packet up to 15 hops (going through 15 AppleTalk routers) to reach its destination.
Packets that must reach destinations more than 15 hops away will not succeed, therefore tunneling from
one large AppleTalk network to another could exceed that limit. In such a case, hop count reduction
enables full network to network communication.
You have finished configuring AURP.