Netopia D3100-I, Руководство пользователя, Страница: 86 / 138

8-86 User’s Reference Guide
G G
G Gee e en
n
n nee e errrriiiicccc ffffiiiillllttttee e errrrssss
If you chose Generic filtering in step 3. on page 8-82 , the Add Filter screen changes as shown:
Note: Generic filters are more complicated to use than IP filters. If you plan to filter only IP traffic, we
recommend that you use IP filters instead.
Generic filters are per formed on packets as a whole, after layer 2 encapsulation is removed (ATM-FUNI or Frame
Relay). You configure them in much the same way as the IP version.
■
The Value and Mask fields can be 8 bytes in length, two characters per byte, so for example a MAC
address is 6 bytes: 00-00-C5-60-34-74.
The Value, Mask, and Offset are used together to determine if the packet matches the filter. The Value is
logically ANDed with the Mask; the Offset specifies the number of bytes into the packet where the Value
ANDed with the Mask must be present. If these match, the filter matches the packet.
■
Several Generic Filters can be ANDed together by toggling Chain to Next Filter to Yes. In this case all the
filters chained must match the packet, and the last filter in the chain determines the For warding decision.
The Compare field works as it does in the Filter version
Add Filter
Enabled: Yes
Forward: No
Type... Generic
Value: 000000000000
Mask: 000000000000
Offset: 0
Compare: Equal
Chain to Next Filter: No
ADD THIS FILTER NOW CANCEL
Enter the IP specific information for this filter.