8-82 User’s Reference Guide
3.
Select
Type
. A popup menu offers the option of either IP or Generic. If you choose IP, continue with the next
step. If you choose Generic filtering, skip to the section
“Generic filters” on page 8-86
.
Warning:
Changing the filter Type clears the filter values if any were previously entered.
4.
Select
Source IP Address
and enter the source IP address this filter will match on. You can enter a subnet
or a host address.
5.
Select
Source IP Address Mask
and enter a mask for the source IP address. This allows you to fur ther
modify the way the filter will match on the source address. Enter 0.0.0.0 to force the filter to match on all
source IP addresses, or enter 255.255.255.255 to match the source IP address exclusively.
6.
Select
Dest. IP Address
and enter the destination IP address this filter will match on. You can enter a
subnet or a host address.
7.
Select
Dest. IP Address Mask
and enter a mask for the destination IP address. This allows you to fur ther
modify the way the filter will match on the destination address. Enter 0.0.0.0 to force the filter to match on
all destination IP addresses.
8.
Select
Protocol Type
and enter
ICMP
,
TCP
,
UDP
,
Any
, or the number of another IP transpor t protocol (see
the table on
page 8-68
).
Note:
If Protocol Type is set to TCP or UDP, the settings for por t comparison that you configure in steps 9.
and 10. will appear. These settings only take effect if the Protocol Type is TCP or UDP.
9.
Select
Source Port Compare
and choose a comparison method for the filter to use on a packet’s source
por t number. Then select
Source Port ID
and enter the actual source por t number to match on (see the
table on
page 8-67
).
10. Select
Dest. Port Compare
and choose a comparison method for the filter to use on a packet’s destination
por t number. Then select
Dest. Port ID
and enter the actual destination por t number to match on (see the
table on
page 8-67
).
11. When you are finished configuring the filter, select
ADD THIS FILTER NOW
to save the filter in the filter set.
Select
CANCEL
to discard the filter and return to the Add Filter Set screen.
Содержание D3100-I
