background image

A-4  Getting Started Guide

Caution

Users should not attempt to make such connections themselves, but should contact the appropriate electric 
inspection authority, or electrician, as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum 
number of terminals allowed to be connected to a telephone inter face. The termination on an inter face may 
consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence 
Numbers of all the devices does not exceed 5.

Important Safety Instructions

Australian Safety Information

The following safety information is provided in conformance with Australian safety requirements:

Caution

DO NOT USE BEFORE READING THE INSTRUCTIONS: Do not connect the Ethernet por ts to a carrier or carriage 
ser vice provider’s telecommunications network or facility unless: a) you have the written consent of the network 
or facility manager, or b) the connection is in accordance with a connection permit or connection rules.

Connection of the Ethernet por ts may cause a hazard or damage to the telecommunication network or facility, 
or persons, with consequential liability for substantial compensation.

Caution

The direct plug-in power supply ser ves as the main power disconnect; locate the direct plug-in power supply 
near the product for easy access.

For use only with CSA Cer tified Class 2 power supply, rated 12VDC, 1.0A.

Telecommunication installation cautions

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at 
the network inter face.

Use caution when installing or modifying telephone lines.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk 
of electric shock from lightning.

Do not use the telephone to repor t a gas leak in the vicinity of the leak.

FCC Part 68 Information

a) This equipment complies with Par t 68 of the FCC rules and the requirements adopted by the ACTA. On the 
bottom of this equipment is a label that contains, among other information, a product identifier in the format 
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

Содержание Cayman 3386-ENT







































Отзывы: