background image

Technical Specifications and Safety Information  A-5

b) List all applicable cer tification jack Universal Ser vice Order Codes (“USOC”) for the equipment: RJ11.

c) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply 
with the applicable FCC Par t 68 rules and requirements adopted by the ACTA. A compliant telephone cord and 
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is 
also compliant. See installation instructions for details.

d) The REN is used to determine the number of devices that may be connected to a telephone line. Excessive 
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not 
all areas, the sum of RENs should not exceed five (5.0). To be cer tain of the number of devices that may be 
connected to a line, as determined by the total RENs, contact the local telephone company. For products 
approved after July 23, 2002, the REN for this product is par t of the product identifier that has the format 
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). 
For earlier products, the REN is separately shown on the label.

e) If this equipment, the Netopia 3300 Series router, causes harm to the telephone network, the telephone 
company will notify you in advance that temporar y discontinuance of ser vice may be required. But if advance 
notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be 
advised of your right to file a complaint with the FCC if you believe it is necessar y.

f) The telephone company may make changes in its facilities, equipment, operations or procedures that could 
affect the operation of the equipment. If this happens the telephone company will provide advance notice in 
order for you to make necessar y modifications to maintain uninterrupted ser vice.

g) If trouble is experienced with this equipment, the Netopia 3300 Series router, for repair or warranty 
information, please contact:

Netopia Technical Suppor t
510-597-5400
www.netopia.com.

If the equipment is causing harm to the telephone network, the telephone company may request that you 
disconnect the equipment until the problem is resolved.

h) This equipment not intended to be repaired by the end user. In case of any problems, please refer to the trou-
bleshooting section of the Product User Manual before calling Netopia Technical Suppor t.

i) Connection to par ty line ser vice is subject to state tariffs. Contact the state public utility commission, public 
ser vice commission or corporation commission for information.

j) If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of 
this Netopia 3300 Series router does not disable your alarm equipment. If you have questions about what will 
disable alarm equipment, consult your telephone company or qualified installer.

Electrical Safety Advisory

Telephone companies repor t that electrical surges, typically lightning transients, are ver y destructive to 
customer terminal equipment connected to AC power sources. This has been identified as a major nationwide 
problem. Therefore it is advised that this equipment be connected to AC power through the use of a surge 
arrestor or similar protection device.

Содержание 3381-ENT







































Отзывы: