NetModule NetBox NB1310, Руководство пользователя

Страница: 66 / 110

User Manual NetBox Wireless Routers 26-Apr-2012 66/110
Dial-in connection failure Dial-in failure to connect.
Dynamic DNS registration DYNDNS update with %DYNDNS_IP% address.
Dynamic DNS failure to reach server DynDNS failure to reach server.
Login to the Web Manager Log-in to the Configuration GUI, by the user: %LOGIN_USER%.
Failed to Login to the Web Manager Failed attempt to log-in to the Configuration GUI, by the user: %LOG-
IN_USER%.
Restart after power up Restart after power up.
Restart due to a software exception
Restart due to a software exception.
Restart due to Web Manager Restart due to Web Manager.
Startup completed Startup completed
Arriving UDP Message %UDP_MESSAGE%
Test Event This is a test.
GPS reception on GPS position is available.
GPS reception off GPS position is not available.
Digital Input 1 on Input change: IN1 is On.
Digital Input 1 off Input change: IN1 is Off.
Digital Input 2 on Input change: IN2 is On.
Digital Input 2 off Input change: IN2 is Off.
Digital Output 1 on Output change: OUT1 is On, changed from %DIO_SOURCE%.
Digital Output 1 off Output change: OUT1 is Off, changed from %DIO_SOURCE%.
Digital Output 2 on Output change: OUT2 is On, changed from %DIO_SOURCE%.
Digital Output 2 off Output change: OUT2 is Off, changed from %DIO_SOURCE%.
The following event variables will be replaced within event texts as follows:
Event Variables Description
%PPP_IP% The current IP address on the mobile interface (ppp0)
%PPP_ERR% Error message in case of mobile connection failure
%VPN_IP% The current address of the OpenVPN interface
%VPN_TYPE% IPsec or OpenVPN
%DYNDNS_IP% The IP address which has been sent to the DNS server
%DIN_USER% User name which the dial-in connection has been authenticated
against
%DIN_IP% The IP address of the dial-in peer
%LOGIN_USER% Name of the user who tried to log on to the Web Manager
%DIO_SOURCE% Source that triggered an output change
%UDP_MESSAGE% Text message that has been received by the message receiver
%RESTART_REASON% Reason why a restart happened
%DST_IN1% Status of digital input 1, possible values include [on, off]
%DST_IN2% Status of digital input 2, possible values include [on, off]
%DST_OUT1% Status of digital output 1, possible values include [on, off]
%DST_OUT2% Status of digital output 2, possible values include [on, off]